Upcycle ~ jeans to girls fashion jacket

So when you're 8 months pregnant and can't sleep at 3am, why not tackle one of those random projects you've had on the to do list for a while? Yup I started this project at 3am and worked on it until about 7am. It was the first time I'd tried it so I'm sure subsequent ones will take less time.

For this I used a used pair of men's size 34 jeans from Value Village, as well as a 1/2 yard of Amy Butler yellow full moon polka dot. Thread and 2 button snaps. What came out of it? A size 3/4T bolero jacket for a little fashionista. * Note that the sizing is fairly forgiving too as this fits my 26 months old.

The pattern for this jacket is from Leila and Ben who have fabulous patterns if you've never checked them out before.

Starting with a pair of used and washed jeans I laid out the pattern trying to use the existing seams. The pattern pieces are 2 x sleeves on the fold, back panel on the fold, two front panels in a mirror image and the collar in a mirror image. The first thing I wanted to show was the well worn cuffs and used these for the sleeve cuffs.

The collar was cut from the side seam, the back panel from the area just below the back pocket. There may be more ways to play with using the existing jeans seams in the back panel but this was the first attempt at it. Front panels were cut from front and back of upper leg.

For the lining I used a scrap piece of Amy Butler lotus fabric in a nice yellow and grey that I think goes great with the denim. I did not make a lining sleeve for this as I didn't want to mess with the existing cuff on the sleeve. Instead I serged around the armholes and left the arms with no lining when I attached the two together.

The sewing was taken straight from the Leila and Ben instructions, omitting the lining sleeve. Before sewing the lining to the outer fabric I also reused the small change pocket from the jeans. Using a stitch ripper I removed it and sewed it onto the front panel. I tried playing with using the back jean pocket but it was just too large.

I used two silver snap to finish it off and it's done!

More room accessories

We're now at the last two items I made for my daughters 'big girl' room. These are total accessories and for fun. Again I think I could have done a dozen different things with the items but this is what I chose; birdy brush holder and a butterfly arrangement.



Tools: Bird or other wooden base unit, craft paint, Modgepodge or other craft glue, sheet of scrapbook paper

First the birdy holder. I bought a wooden bird box (would you call it a box? ...anyhow) it was purchased from Michael's for less than $5 and then I dressed it up.
First I painted it. I used the craft paint also available at Michael's for cheap and it seems to cover it just fine.
After it dried I got out my trusty bottle of ModgePodge and covered the front of the bird liberally but not too thick.
I then took my sheet of scrapbook paper and pressed it against the flat front of the bird.
Wait for it to dry then take an exacto knife or similarly sharp edge and trim off the excess scrapbook paper to be left with a beautiful printed bird.



I'm using this right now to keep her hairbrush in. I think I might find some more holders that can be used for hair ties or other little things and give the little bird some friends :)




Next project is the butterfly arrangement




My original plan was to make a butterfly mobile but I changed my mind at the last minute. I still think it would make a great mobile.
I purchased these beautiful butterflies from an Etsy store BeachCottageStudio they cost under $10 and are so cute. If anyone has a scrapbook cutter these would also be easy to make at home with a butterfly template. However, since I am without one I simply purchased.

Tools: paper butterflies, florist wire, floral oasis, container, faux flowers, glue gun.

First I took florist wire and painted them an off-white with craft paint. I just thought this would look nicer than the bare metal.
Once dry I took out my trusty glue gun and started glueing the little insects to the wire. I put one on each side to make it look more full from all angles.
The container was an old one I had hanging around the house but anything could be used really. I stuffed it with dry oasis and some faux flowers then added the wires with butterflies.
Voila!

Curtains and pillows

The next two projects for the 'big girl' room include the curtains to keep out the light for naps...and for when the morning sun actually starts coming up early again (oh how I wish that was now) as well as the decorative pillows. Both were super easy and fun.



Curtains

The curtains started as an inexpensive Ikea set, I think I paid about $9.99 for the set. They were in a dark brown and were very long but ready to trim. I actually didn't choose these curtains specifically for my daughters room, they were what we had hanging in there as the spare bedroom. In an effort to save some money and not buy new I simply revamped them a little.

Tools: scissors, sewing machine, tape measure, 2 yards of fabric and the original curtains of course.

I measured down from the top of the curtain to where I wanted the new fabric band to be and marked and cut it for both curtains.

Then cut the two fabric bands in the height I wanted (about 25 inches) plus followed the width of the curtains leaving about an inch extra on either side to finish the edges. Putting right sides together I sewed the band to the bottom of the pre-made curtain where I had cut it. After both sides were done I took the bottom of the Ikea curtains and sewed them to the bottom of my band, right sides together. I wrapped the band around the back and sewed the seam then measured where to hem them. That was it curtains were hung after that.
Now I didn't serge or hide my raw edges in the back. I figured I wouldn't be washing these too often, something I may regret later not sure.



Two Decorative Pillows

These are great little additions to the bedroom and I'll likely make more and change up the look once in a while. Making an applique that your little one really adores is great, my daughter was obsessed with owls for a while, she also loves Dora but I'm not going there :)

Tools: 14 x 14 pillow form, 1/2 yard of fabric (you can use the same for front and back or switch it up), HeatBond or another double layer adhesive for the applique. Any other embellishments you may want.

First step was cutting two squares one that's 14 x 14 and one that's 14 x 16 and I serged the edges. You can also zigzag the edges. Why 14 x 16? Well I didn't want to do any zipper enclosures so a simple overlap on the back side did just fine.

Then the fun part, figuring out the applique pattern. Lots of ways to do this. Once you adhere the HeatBond to the back of a nice coordinating fabric or two you'll have a nice paper backing on your fabric. Then you can draw or trace any outline you like and cut it out.
I'm not a great artist so I usually do a Google search for an image I want and print that out as my guideline. This is where you really get to have fun. You can also sew on ribbons, piping or just plain shapes or squares if you prefer. I have some more examples for a customer I recently made more pillows for below.

Once you have all the decorations down you can sew the two sides together right sides facing. The two hemmed edges will need to overlap a little to hide the pillow inside. Then turn inside out and you're done.